控件[tem_25_34]渲染出错,Source:未将对象引用设置到对象的实例。
Thin Cutting discs for non-ferrous metal
-
Type:T41
-
StructureResin cut wheel, glass fiber reinforced diameter :75-230mm thickness :1.0-2.0mm
-
Features:Our non-ferrous metal cutting discs are manufactured with a particularly high proportion of C. They are sharp and self-sharpening. Ultra-thin and more aggressive. No clogging, no slippage. High performance and fast cutting.
-
Applicable Tools:Angle grinder
SIZE mm | INCH | Speed [m/s] | Max. Speed[RPM] | Type | Box | M. box |
---|---|---|---|---|---|---|
106x1.2x16 | 4 | 80m/s | 15,300 | 50 | 500 | |
115x1.2x22 | 4 | 80m/s | 13,300 | 50 | 500 | |
115x1.6x22 | 4 | 13,300 | 50 | 500 | ||
125x1.2x16 | 5 | 80m/s | 12,200 | 50 | 500 | |
125x1.2x22 | 5 | 12,200 | 50 | 500 | ||
125x1.6x22 | 5 | 12,200 | 50 | 500 | ||
150x1.6x22 | 6 | 80m/s | 10,200 | 25 | 250 | |
180x1.6x22 | 7 | 8,600 | 25 | 250 | ||
230x1.9x22 | 9 | 6,600 | 25 | 100 |
Super-thin cutting discs for non-ferrous metal are manufactured with a particularly high proportion of C.
1.0/1.6/1.9 mm thick cutting blade is used for fast, easy cutting with minimal burrs.
Applicable Tools:
Angle grinder.
Advantages:
- Comfortable to use with little contact pressure
- Easy handling
- High cutting speed
- Long product life
- Almost no burns on the surface
- Minimum burr formation for less rework
Applications:
- Cutting of Non-ferrous metals
- Cutting of bronze
- Cutting of brass
- Cutting of bearing alloys
- Cutting of aluminium alloys
Attention:Aluminum powder is very fine, easily adsorbed on the Angle grinder. When cutting aluminum with an electric Angle grinder, it is recommended to use a thinner aluminum cutting sheet, which can reduce the dust produced by half. In the closed space to constantly suction dust, prevent high concentration of aluminum powder explosion.