控件[tem_25_34]渲染出错,Source:未将对象引用设置到对象的实例。
Hand-held cutting discs for Aluminium
-
Type:T41 / T42
-
StructureHand-held Aluminium cutting disc, Thickness 2.0-3.0mm, for cutting aluminium, OD: 4"-9".
-
Features:Hand-held cutting discs for Aluminium are manufactured with a particularly high proportion of C.
-
Applicable Tools:Angle grinder
-
Recommended applicationCutting of Non-ferrous metal, bronze , brass, bearing alloys, aluminium alloys.
SIZE (mm) | INCH | Speed [m/s] | Max. Speed[RPM] | Type | Box | M. box |
---|---|---|---|---|---|---|
115x2x22 | 4 -1/2 | 80 | 13,300 | 25 | 200 | |
180x2x22 | 7 | 80 | 8,600 | 25 | 100 | |
180x3x22 | 7 | 80 | 8,600 | 25 | 100 | |
230x2x22 | 9 | 80 | 6,600 | 25 | 100 | |
230x2.5x22 | 9 | 6,600 | 25 | 100 | ||
230x3x22 | 9 | 6,600 | 25 | 50 |
Hand-held cutting discs for Aluminium are manufactured with a particularly high proportion of C.
2.5 mm thick cutting disc is used for general-purpose conventional cutting.
3.0/3.2mm thick cutting disc has the longest service life and high lateral stability.
Applicable Tools:
Angle grinder.
Advantages:
- Comfortable to use with little contact pressure
- Easy handling
- High cutting speed
- Long product life
- Almost no burns on the surface
- Minimum burr formation for less rework
Applications:
- Cutting of Non-ferrous metals
- Cutting of bronze
- Cutting of brass
- Cutting of bearing alloys
- Cutting of aluminium alloys
Attention:Aluminum powder is very fine, easily adsorbed on the Angle grinder. When cutting aluminum with an electric Angle grinder, it is recommended to use a thinner aluminum cutting sheet, which can reduce the dust produced by half. Please also note that in the closed space to constantly suction dust, prevent high concentration of aluminum powder explosion.